Vaporesso Tarot Nano

The Tarot Nano 80W/TC is the shrunken version of the uniquely shaped Tarot Pro 160W/TC, but with a new center-mounted 510 connection. It retains the same Omni Board, just with half the power and slightly higher resistance load. There is upgradable firmware via the side USB port with an internal battery of 2600 mAh, a max wattage of 80 watts with a minimum resistance load of 0.15-ohms.

The Tarot Nano supports TC with a temp range from of 280F-600F (100C-315C) via pre-settings for SS, Ni, or Ti, and there is also TCR with two programmable memory settings. If that wasn’t enough, the Omni Board in this mod includes four other easy-to-access modes. The other modes are: Smart VW mode (new atomizer recognition with auto-set power in a safe range), CCW (custom curve wattage), and CCT (custom curve temperature), and bypass.

Smart VW mode allows any kanthal-coiled atty to be detected with an automatic safe power level set. Overriding this feature is as simple as adjusting the +/- toward the power you wish. Or, you can leave it as is. This feature is great for the new vaper that may not know exactly where to set the power.

CCW and CCT modes are both the same thing, but one is for TC and the other for VW. This mode allows you to customize the way your atomizer performs within a 5-second time frame based on the wattage you set per .5-seconds. Essentially what that means is you can design the “curve” of heat you experience. The self-adjusted curve is displayed in a bar graph where each bar has its own wattage setting. Each bar represents .5 seconds. You can set it to peak in the middle, the end or the beginning. This feature really does change the way you experience the vape.